TY60 Cummins Engine Puller Machine For Overhead Stringing

Product Description

TY40 Hydraulic Puller

Together with tension machine, this model allows for the tension stringing of 220kV lines in mountainous and hilly areas and can be used for the traction stringing of OPGW or ADSS cable in various terrains.

Characteristics

• Bull-wheel diameter: 400mm
• Groove number: 7
• Max rope diameter : 16mm
• Max diameter of rope reel: 1200mm
• Total weight: 3000kg
• Overall dimension (length*width*height): 3600*2600*2200mm

• Max intermittent pull: 40kN
• Max continuous pull: 30kN
• Speed at max pull: 2.5km/h
• Max speed: 5km/h
• Pull at max speed: 20kN

Engine

• Diesel: 77kw(103hp)
• Cooling system: water
• Electrical system: 24V

Main configuration

• Engine: Cummins
• hydraulic pump: German Rexroth
• Main motor: German Rexroth
• speed reducer: German Rexroth
• Tail bracket hoisting motor: American Eton
• Hydraulic meter: German WIKA
• Operating handle: German Rexroth

Hydraulic Transmission

Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.

Configuration

• Hydraulic dynamometer with set-point and automatic control of maximum pull
• Hydraulic oil cooling system
• Control instruments for hydraulic system and diesel engine
• On board reel winder with automatic level wind, suitable for standard reel mod. 1100 and 1200
• Mechanical front stabilizer
• Grounding connection point

Additional Devices

• Lighting system for the trailer
• Hydraulic rope clamp for reel change
• Swivel guide rope roller
• Trailer for towing at max speed of 30 km/h
• Extra shaft
• Digital speed and meter counter (extra charge)