TY180 Transmission Line Stringing Equipment Puller Machine For Overhead Stringing

The machine allows for the tension stringing of 4-bundle conductor of 630mm2 and below in mountainous and hilly areas, and of 4-bundle conductor of 720mm2 and below in flat lands; besides, it can be used for traction stringing of OPGW or ADSS optical cable and 500kV traction stringing in various terrains.

Characteristics

• Bull-wheel diameter: 700mm
• Groove number: 10
• Max rope diameter : 27mm
• Max diameter of coupling: 100mm
• Electric system: 24V
• Max diameter of rope reel: 1400mm
• Total weight: 6800kg
• Overall dimension (length*width*height): 4300*2360*2380mm

Performance

• Max intermittent pull: 180kN
• Max continuous pull: 150kN
• Speed at max pull: 2.5km/h
• Max speed: 5km/h
• Pull at max speed: 75kN

• Diesel: 239kw(320hp)
• Cooling system: water
• Electrical system: 24V

• Engine: Cummins
• hydraulic pump: German Rexroth
• Main motor: German Rexroth
• speed reducer: German Rexroth
• Tail bracket hoisting motor: American Eton
• Hydraulic meter: German WIKA
• Operating handle: German Rexroth

Hydraulic Transmission

Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.

Configuration

• Hydraulic dynamometer with set-point and automatic control of maximum pull
• Hydraulic oil cooling system
• Control instruments for hydraulic system and diesel engine
• On board reel winder with automatic level wind, suitable for standard reel mod. 1100 and 1400
• Hydraulic front stabilizer
• Grounding connection point

Additional Devices

• Lighting system for the trailer
• Hydraulic rope clamp for reel change
• Swivel guide rope roller
• Trailer for towing at max speed of 30 km/h
• Extra shaft
• Digital speed and meter counter (extra charge)