TY280 Stringing Equipment 280kN Puller Machine For Overhead Stringing

This machine is mainly applied in long-span and mountainous areas and foothills for tension stringing of 4-bundle conductor of 500kV or twin-bundle conductor of 220kV and conductor 800mm2 below, allowing for the tension stringing of 500kV haulage rope in various terrains.

Characteristics

• Bull-wheel diameter: 960mm
• Groove number: 11
• Max rope diameter : 38mm
• Max diameter of connector: 100mm
• Max diameter of rope reel: 1600mm
• Total weight: 15500kg
• Overall dimension (length*width*height): 5800*2300*2700mm

Performance

• Max intermittent pull: 280kN
• Max continuous pull: 250kN
• Speed at max pull: 2.5km/h
• Max speed: 5km/h
• Pull at max speed: 120kN

• Diesel: 298kw(400hp)
• Cooling system: water
• Electrical system: 24V

• Engine: Cummins
• Main pump: German Rexroth
• Main motor speed reducer: German Rexroth
• Tail bracket hoisting motor: American Eton
• Hydraulic meter: German WIKA
• Operating handle: German Rexroth

Hydraulic Transmission

Closed hydraulic circuit for step less speed variation in both rotating directions. This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.

Configuration

• Hydraulic dynamometer with set-point and automatic control of maximum pull
• Hydraulic oil cooling system
• Control instruments for hydraulic system and diesel engine
• On board reel winder with automatic level wind, suitable for standard reel mod. 1400 and 1600
• Hydraulic front stabilizer
• Grounding connection point

Additional Devices

• Lighting system for the trailer
• Air brake system for the trailer
• Hydraulic rope clamp for reel change
• Swivel guide rope roller
• Trailer for towing at max speed of 30 km/h
• Extra shaft
• Digital speed and meter counter